[attachmentid=39]
Model: HobbyZone Aerobird Swift
Filename: aerobird-swift.zip
Author: Gary Gunnerson
Email: garyg51384_at_aol.com
HomePage: http://gunnerson.homestead.com/files/fms_models.htm
Created: June 2008
Updated: Sept 2008

Nice pod and boom aileron trainer from the HobbyZone folks.
http://www.hobbyzone.com/rc_planes_hobbyzo...obird_swift.htm

Download link:
[attachmentid=38]

Model Specs are:
Span: 48.0 in (1.22m)
Length: 34.0 in (0.86m)
Weight: 22oz (0.624kg)
Motor: Speed 480
Radio: 3 channel A/E/T proportional FM, 27 MHz, 6 channels
Speed Control : Power FET proportional ESC/RX
Battery: 7 cell 8.4V 1000mAh Ni-MH pack
Channels: 3 A/E/T

Updated: Sept 2008

Adjusted the 3D model to add more polygons for the fuselage
combined push rods for the v-tail as the actual airplane
also ties them together for elevator control only. Also made
some small adjustments to the .par file.

Note, this airplane requires full up elevator for ROG to keep
the tail wheel on the ground and ground tracking straight.